당신은 당신의 은신처에 상어를 가지고 있고, "당신이 레이저를 부착 할 수 있다면 정말 좋을 것"이라고 생각하고 있습니다.
그러면이 작은 레이저 다이오드 모듈을 볼 수 있습니다 : 좋은 타이밍! 이 캡슐화 된 레이저 다이오드는 650nm 빨간색 파장의 Class IIIa 5mW입니다.
2.8V ~ 5.2V로 구동 할 수 있으므로 임베디드 전자 프로젝트에 적합합니다.
이 특정 레이저 다이오드는 도트를 선으로 바꾸기 위해 부착 된 렌즈를 가지고 있습니다.
우리는 이것이 3D 스캐너를 만드는 데 특히 좋을 것이라고 생각하지만, 다른 멋진 용도가 많이 있습니다!
빨간색과 검정색 전선에 전원을 연결하기 만하면 즉시 레이저가 방출됩니다.
라인 빔 스프레드는 120 °이므로 - 5cm 거리에서 라인 길이는 15cm입니다. 선이 희미 해지고 날카로운 컷오프가 없습니다.
참고 사항 :이것은 레이저 포인터가 아닙니다. 그것은 통합 드라이버가있는 다이오드입니다. 여전히 3 ~ 5VDC 전원 공급 장치가 필요합니다.
이 다이오드는 5mW 출력이며 안전 라벨이 표시되어 있습니다. 레이저 안전 및 등급에 대한 자세한 내용은 Wikipedia 페이지를 확인하십시오.
You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated laser diodes are Class IIIa 5mW, with a 650nm red wavelength. They can be driven from 2.8V to 5.2V so they're great for your embedded electronics project.
This particular laser diode has a lens attached to turn the dot into a line. We think this would be particularly good for making a 3D scanner, but there are probably many other cool uses! Simply connect power to the red and black wires and you will be lasing in no time.
The line beam spread is 120° - so from a distance of 5cm the line is 15cm long. The line fades out and doesn't have a sharp cut-off.
Please note: this is not a laser pointer. It's a diode with integrated driver. You still need a 3 to 5VDC power supply. These diodes are 5mW output, and have a safety label marked on them. For more information on laser safety and ratings check out the Wikipedia page